
Aquarium Silicone
| Base | Silicone polymer |
|---|---|
| Polymerization system | Acetic |
| Density | 1.02 ± 0.03 g/ml (ASTM D 792) |
| Shore A | 15±3 (after 28 days) |
| Tensile strength | ≥ 1,5 N/mm² (23°C and 50% RH) (ISO |
| Elongation at break | >500% |
| Elastic recovery | Approx. 100 % (ISO 7389) |
| Sagging | 0 mm |
| Temperature resistance | -50°C to +150°C |
| Application temperature | +5°C to +40°C |
| Packaging | Transparent · 280 ml · 25 pcs RAL 9010 · 280 ml · 25 pcs |
Prices depend on volume, packing and destination. Ask for our current export price list.
Technical data sheets, test reports and certificates are sent with your quote.
Aquarium Silicone has been specifically formulated for the fabrication of fresh and salt-water aquariums. The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish. 100% silicone polymer. High strength. Solvent free . Resistant to ozone, ultra violet radiation and temperature extremes Applications: 1. Contact area must be dry, clean, free from dust, oil and grease. 2. Ensure neat sealant edges mask the areas adjacent to joints with Masking tape. 3. Cut the tip of the cartridge with angle in accordance with size of the surface to be applied on. 4. Place the cartridge in the gun and inject the joint with the sealant 5. The applied sealant should be smoothed immediately with a wet spatula, tool or finger. Remove masking tape right
Get our export price list.
Tell us your market, products and volume. Our export team replies within 24 hours on working days.



