
Stone & Brick Adhesive
| Base | Polyurethane prepolymer |
|---|---|
| Polymerization system | Moisture hardening |
| Tack | -free time (L 1cm) 2-3 min (ASTM C1622) |
| Full curing time | 48 hours |
| Shear bond strength | 10-15 N/mm² |
| Initial grab | 15 min |
| Open time | <2 min |
| Colour | Light yellow |
| Temperature resistance | -30°C to +80°C |
| Application temperature | 5°C to +35°C |
| Packaging | 750 ml · 12 pcs |
Prices depend on volume, packing and destination. Ask for our current export price list.
Technical data sheets, test reports and certificates are sent with your quote.
Thanks to its "collapsing gel technology", Stone & Brick Adhesive foam is the ideal solution for laying adjusted blocks and bricks, stone in general and concrete. The particular formulation means that the foam, instead of swelling, reduces its volume after extrusion, creating a powerful adhesive film that guarantees perfect solidity of the product, avoiding excessive thickness (and hence useless and harmful thermal bridges). It is a one-component polyurethane foam that is cured by action of the moisture present in the air. Applications: The can must be shaken vigorously about 25/30 times before use, then screwed onto the special dispensing gun. The quantity of foam dispensed can be adjusted by pressing the trigger or by acting on the screw adjustment on the back of the gun. It is in gel form, it does not expand once extruded. Moisten the application surfaces by spraying water on them (this facilitates perfect cross-linking of the foam). Keep the can upright during application. Apply the foam on the surfaces (2 lines of adhesive parallel to each other and 5 to 10 cm apart) and press to make them adhere.
Get our export price list.
Tell us your market, products and volume. Our export team replies within 24 hours on working days.



